Satinsky Clamps — Pattern and Clinical Use
The Satinsky lets a surgeon work on a large vessel without stopping circulation through it. Its curved jaw is applied tangentially to the vessel wall, occluding a segment of the circumference so an anastomosis can be constructed on that portion while blood continues to flow past. That is what makes partial-occlusion aortic and vena caval work possible.
The curve of the jaw and the length of the occluding surface define how much circumference is captured. Applied wrongly the clamp either fails to occlude or takes too much of the lumen and compromises flow, so pattern selection matters clinically.
Satinsky Clamps Variants and Specifications
Standard Satinsky patterns.
| Variant | Specification / use |
|---|---|
| Small curve | Partial occlusion of smaller vessels |
| Standard curve, 24 cm | General side-biting occlusion |
| Large curve, 27–30 cm | Aorta and vena cava |
| Atraumatic ridged jaw | Protects the vessel wall |
| Long shank | Deep thoracic and abdominal fields |
| Graduated ratchet | Controlled occlusion pressure |
Material, Finish and Quality Control
We forge Satinsky clamps from AISI 420 martensitic stainless. Jaw curvature is gauged to pattern and the atraumatic ridging checked, since the curve determines how much circumference is captured. Each batch passes Rockwell hardness testing, dimensional checks on jaw curvature to pattern, and visual inspection under our ISO 13485 system before passivation and final finishing. Mirror and satin finishes are both available — satin is usually specified where glare under operating lights is a concern.
Who Sources Satinsky Clamps From Surgical Star
Satinsky clamps sell to cardiac, vascular and transplant surgical distributors, and are a high-value item ordered in several curve sizes.
OEM, Certification and Ordering
Every Satinsky clamps can be produced as a private-label line: your logo laser-marked on the shank, your catalog numbers, and your own printed packaging, manufactured from your drawings or a reference sample. Production runs inside a documented ISO 13485 quality system, with CE marking under EU MDR 2017/745 and US FDA establishment registration behind it. Your shipment carries a certificate of conformity plus the ASTM F899 material certificate for the grade actually used.
Minimums stay deliberately low so a new brand can launch without a heavy first order, and pricing is quoted direct from the factory on volume tiers. Bulk production usually takes four to six weeks from sample approval, shipped DDP with export paperwork and HS codes handled. See how OEM & private label works →
Related Cardiovascular & Thoracic Instruments
Frequently Asked Questions
What is partial occlusion used for?
Constructing an anastomosis on part of a large vessel’s circumference while blood continues to flow through the remaining lumen.
How is the curve size chosen?
By how much circumference must be captured. Too small and it does not occlude the working segment; too large and it compromises flow through the remaining lumen.
Where is it used most?
Aortic and vena caval work, and in transplant surgery where maintaining flow while anastomosing is important.
Can you manufacture these under our own brand?
Yes — full OEM and private label. We laser-mark your logo and catalog numbers, pack in your branded boxes, and work from your drawings, tech pack or a reference sample, with a pre-production sample approved before any bulk run.
Send your pattern list, drawing or a reference sample and we’ll quote MOQ, pricing and lead time — standard catalog or fully private-label.
Request a Free Quote Order a Sample