Sterilizing Trays — Pattern and Clinical Use
The perforations are functional: they let water drain during washer-disinfector cycles and let steam reach every instrument surface during autoclaving. A solid tray would pool water and shield instrument surfaces from steam, either of which means the load is not reliably sterilised. Trays are sized to standard container and washer rack dimensions.
Perforation edges must be fully deburred, because a burr both damages instruments in handling and creates a site where organic material lodges and resists cleaning.
Sterilizing Trays Variants and Specifications
Standard sterilizing tray configurations.
| Variant | Specification / use |
|---|---|
| Full DIN size | Standard full instrument set |
| Half DIN size | Smaller sets |
| With lid | Covered set handling |
| Silicone finger mat | Secures delicate instruments |
| Stacking profile | Multiple trays per container |
| Folding handles | Stacks without fouling |
Material, Finish and Quality Control
We forge Sterilizing trays from 316L austenitic stainless. Every perforation edge is deburred and checked, since burrs damage instruments and lodge organic material that resists cleaning. Each batch passes Rockwell hardness testing, dimensional checks on perforation deburring, and visual inspection under our ISO 13485 system before passivation and final finishing. Mirror and satin finishes are both available — satin is usually specified where glare under operating lights is a concern.
Who Sources Sterilizing Trays From Surgical Star
Sterilizing trays sell to sterile services departments and hospital distributors, with fit to the existing container and washer system being the deciding specification.
OEM, Certification and Ordering
Every Sterilizing trays can be produced under your own brand: your logo laser-marked, your catalog numbers, and your labelling applied before the set is packed. Our quality file is ISO 13485, our EU route is CE marking under MDR 2017/745, and our facility holds US FDA establishment registration. Conformity and ASTM F899 material certificates are issued against each order.
You order direct from the factory with no trading-house margin, on volume-tiered pricing and a minimum matched to your pattern and finish. Once your branded sample is signed off, expect roughly four to six weeks to bulk delivery, worldwide DDP. See how OEM & private label works →
Related Holloware & Sterilization Instruments
Frequently Asked Questions
Why are sterilizing trays perforated?
So water drains during washing and steam reaches every instrument surface during autoclaving. A solid tray pools water and shields surfaces.
Why does deburring matter?
A burr damages instruments during handling and creates a site where organic material lodges and resists cleaning.
Do trays need to fit a specific system?
Yes. They are sized to standard container and washer rack dimensions, so the system in use must be specified.
Can you manufacture these under our own brand?
Yes — full OEM and private label. We laser-mark your logo and catalog numbers, pack in your branded boxes, and work from your drawings, tech pack or a reference sample, with a pre-production sample approved before any bulk run.
Send your pattern list, drawing or a reference sample and we’ll quote MOQ, pricing and lead time — standard catalog or fully private-label.
Request a Free Quote Order a Sample